ELICA CIRCUS PLUS ISLAND IX/A/90 User's Guide Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 140
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
18
Operation
Use the high suction speed in cases of concentrated kitchen
vapours. It is recommended that the cooker hood suction is
switched on for 5 minutes prior to cooking and to leave in
operation during cooking and for another 15 minutes
approximately after terminating cooking.
1 = ON/OFF – Speed increase
2 = Lights ON/OFF
3 = Selection of the desired function
4 = Setting the function in use
5 = The display shows:
a – list of available functions
b – indicator of the function currently in use
c – indicator of the speed in use
d – clock / data related to the function in use
e – saturation of the anti-grease filter
f – saturation of the carbon anti-odour filter
Available functions
SPEED
Switch on/Speed increase:
- press button 1 to switch on the hood
- press button 1 to go to the next speeds, until the hood is
switched off
The extraction speed is shown on the display (c), in the
following manner:
1st speed
performance 40%
***
2nd
speed
performance 60%
***
3rd
speed
performance 80%
***
high
speed
performance 100%
***
OFF
*** the percentage displayed refers to the indicative value of the
performance
The high speed is timed for 10 minutes; to interrupt the timing
and switch off the hood press button 1.
NB= the speed might increase automatically during use, this is
because the control is fitted with a system that protects the
display in case of overtemperatures.
CLOCK
To set the clock:
- press button 3 until moving the indicator(b) on function
“CLOCK”
- press button 4 to access clock setting
- keep button 4 pressed:
keeping it pressed for one second increases the time by
one minute
after 10 seconds, each second it is pressed increases the
time by 10 minutes
To store the set time:
- press button 3
TIMER
Stopwatch Function
- press button 3 until moving the indicator(b) on the “TIMER”
function
- press button 4 to access timer setting
- to start the stopwatch: simultaneously press button 3 and
button 4, for 5 seconds
- to stop the stopwatch: simultaneously press button 3 and
button 4, for 5 seconds
Note= after 60 minutes the stopwatch stops automatically
“Countdown” Function
- press button 3 until moving the indicator(b) on the “TIMER”
function
- press button 4 to access timer setting
To set the “Countdown” timer:
- keep button 4 pressed:
keeping it pressed for one second increases the timer by
one minute
after 10 seconds, each second it is pressed increases the
timer by 5 minutes
To save the “Countdown” timer
- press button 3
The Timer indicator(b) will start flashing to indicate the
start of the “Countdown”
When the “Countdown” reaches “0:00” the motor is
switched off
Note = to set a new timer, button 4 must be pressed until the
indication “0:00” is displayed again
Note = the maximum countdown setting time is 60 minutes
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 139 140

Comments to this Manuals

No comments